Fluid Mechanics Lab Equipment Manufacturer, Suppliers and Exporter in India
Educational Lab Equipment India is leading Fluid Mechanics Lab Equipment Manufacturer,and supplier and Exporter in India
Hydrostatics, flow measurement, pipe friction, pumps, fans and open-channel flow are covered by the Fluid Mechanics Lab Equipment range from Engineering Lab Equipment. Basic experiments use the Hydrostatic Pressure Apparatus, Pascal Apparatus, Bernoulli Theorem Demonstration Module and Osborne Reynolds Demonstration, while pipe losses are measured on the Fluid Friction Measurements rig with four pipes of 4.5 to 17.2 mm bore or the Energy Losses in Pipes trainer. Larger set-ups include a Subsonic Wind Tunnel, series and parallel pumps and a Tilting Flume in 2.5 m or 5.0 m lengths.
Frequently Asked Questions
How do the Dead Weight Pressure Gauge Calibrator and the Precision Pressure Gauge Calibrator differ?
Both are portable, self-contained deadweight instruments used as primary standards for calibrating pressure gauges and pressure transducers. The Dead Weight Pressure Gauge Calibrator uses a capstan-operated hydraulic ram with oil to balance the deadweights, while the Precision Pressure Gauge Calibrator combines a low and a high pressure range using dual pistons of different effective area.
Which units measure pipe friction losses?
The Fluid Friction Measurements trainer has four smoothbore pipes from 4.5 mm to 17.2 mm inside diameter with 38 tapping points, read on 8 tube manometers and a Bourdon tube gauge. The Energy Losses in Pipes trainer has ten pipe sections of differing material, diameter and geometry, including straight sections and a pipe bend, with annular pressure chambers either side of each section.
What can be studied in the Tilting Flume?
The Tilting Flume is a small open-channel flume with a 76 mm wide, 250 mm high working section and clear acrylic sides, offered in 2.5 m or 5.0 m working-section lengths. It is used to study open-channel hydraulics, including Manning's formula.
What does the Osborne Reynolds Demonstration show?
It is used to study the behaviour of liquid flow through a pipe and to determine the Reynolds number at each flow state, so that the laminar, transitional and turbulent ranges can be identified. Flow is observed in a transparent, horizontal methacrylate test pipe of 16 mm inner diameter.
Request a Quote
For prices on the Osborne Reynolds Demonstration or the Tilting Flume, send your requirement to Engineering Lab Equipment stating quantities and the 2.5 m or 5.0 m flume length.
Last updated: October 2026
Axial Fan Demonstration Unit
Product Code : EL-FMLE-10647
Suitable for higher flows at lower delivery pressures.
Note:
View Details
Basic Metacentric Height
Product Code : EL-FMLE-10648
Used to determine the metacentric height of a ship model.
Note:
View Details
Bernoulli Theorem Demonstration Module
Product Code : EL-FMLE-10649
Manometer board with eight tubes.
Note:
View Details
Cavitation Demonstration Apparatus
Product Code : EL-FMLE-10650
Demonstrate and observe the basic principles of cavitation.
Note:
View Details
Centrifugal Fan Demonstration Unit
Product Code : EL-FMLE-10651
Provides the basic experiments to get to know the operating behavior of radial fans.
Note:
View Details
Centrifugal Pump Test Bed
Product Code : EL-FMLE-10652
Self-contained unit operated on closed circuit basis.
Note:
View Details
Compressible Flow Unit
Product Code : EL-FMLE-10653
Designed to teach the concepts of compressible flow.
Note:
View Details
Dead Weight Pressure Gauge Calibrator
Product Code : EL-FMLE-10654
Used in lecture theatre demonstrations or as a master calibrator for the laboratory.
Note:
View Details
Demonstration Francis Turbine
Product Code : EL-FMLE-10655
Operating Principle of a Francis Turbines the model of a Francis turbine demonstrating the function of a reaction turbine.
Note:
View Details
Demonstration Pelton Turbine
Product Code : EL-FMLE-10656
The Pelton turbine is a type of impulse turbine.
Note:
View Details
Flow Meter Demonstration Unit
Product Code : EL-FMLE-10658
A flow control valve permits variation of the flow rate through the circuit.
Note:
View Details
Fluid Friction Measurements
Product Code : EL-FMLE-10659
Comprises three straight pipe sections made of different materials.
Note:
View Details
Fluid Properties and Hydrostatics Bench
Product Code : EL-FMLE-10660
Numerous experiments on the topic of the hydrostatics of liquids and gases can be carried out.
Note:
View Details
Fluid Statics and Manometry
Product Code : EL-FMLE-10661
Designed to study static fluids and manometer.
Note:
View Details
Free and Forced Vortex Apparatus
Product Code : EL-FMLE-10662
For the study of the shape of ‘free and forced vortices’.
Note:
View Details
Gear Pump Demonstration Unit
Product Code : EL-FMLE-10663
The gear pump is the most widely used of the positive action rotary pumps.
Note:
View Details
Hydraulic Ram Test Bed
Product Code : EL-FMLE-10664
Comprises an acrylic base incorporating pulse and non-return valves and a supply reservoir on a stand.
Note:
View Details
Hydrostatic Pressure Apparatus
Product Code : EL-FMLE-10665
Designed to determine the static thrust exerted by a fluid on a submerged surface.
Note:
View Details
Impact of a Jet Apparatus
Product Code : EL-FMLE-10666
Consists of a cylindrical tank with lateral transparent surfaces.
Note:
View Details
Multi Pump Test Rig
Product Code : EL-FMLE-10667
Demonstrate different flow processes at different control structures in the open channel.
Note:
View Details
Notch Tank Apparatus
Product Code : EL-FMLE-10668
Demonstrate different flow processes at different control structures in the open channel.
Note:
View Details
Orifice and Mouth Piece Flow Apparatus
Product Code : EL-FMLE-10669
Designed to measure the co-efficient of discharge of orifice & mouthpiece.
Note:
View Details
Orifice and Venturi Meter Demonstration
Product Code : EL-FMLE-10670
A flow control valve permits variation of the flow rate through the circuit.
Note:
View Details
Osborne Reynolds Demonstration
Product Code : EL-FMLE-10671
Used to study the characteristics of a liquid flow through a pipe.
Note:
View Details
Particle Drag Coefficients
Product Code : EL-FMLE-10672
A simple falling-sphere viscometer.
Note:
View Details
Pascal Apparatus
Product Code : EL-FMLE-10673
Demonstration of Pascal’s principal.
Note:
View Details
Pipe Network Apparatus
Product Code : EL-FMLE-10674
Demonstrates the characteristics of flow through different arrangements of pipes.
Note:
View Details
Pipe Surge and Water Hammer Apparatus
Product Code : EL-FMLE-10675
Comprises two stainless Steel test pipes connected to a constant head tank.
Note:
View Details
Pitot Tube Apparatus
Product Code : EL-FMLE-10676
Demonstration that the flow speed is proportional to the pressure difference between the total pressure and the static pressure.
Note:
View Details
Plunger Pump Demonstration Unit
Product Code : EL-FMLE-10677
Facilities for logging, processing and displaying data graphically.
Note:
View Details
Precision Pressure Gauge Calibrator
Product Code : EL-FMLE-10678
Calibration of pressure gauges by deadweight method.
Note:
View Details
Propeller Turbine
Product Code : EL-FMLE-10679
Demonstrate the operating principles of a propeller turbine.
Note:
View Details
Series Parallel Pumps
Product Code : EL-FMLE-10680
Features a closed water circuit with a water tank and two centrifugal pumps with drive motors.
Note:
View Details
Subsonic Wind Tunnel
Product Code : EL-FMLE-10681
A small wind tunnel designed for bench top operation.
Note:
View Details
Tilting Flume
Product Code : EL-FMLE-10682
Applying and understanding Manning’s formula.
Note:
View Details