Metric Metal Ruler
Product Code : EL-MAILE-10854
Metric Metal Ruler (code EL-MAILE-10854) is a stainless steel ruler, or rule, used in geometry, technical drawing, engineering and building to measure lengths and rule straight lines. It comes in 15 cm, 30 cm, 60 cm and 100 cm lengths, with a black scale on a silver base, extra large numbers, an mm-inch table on the back and a raised edge on the right hand side for lifting it from a flat surface.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Type | Ruler |
| Material | Stainless steel |
| Lengths | 15 cm, 30 cm, 60 cm, 100 cm |
| Colour | Silver bottom with black scale |
| Numbers | Extra large numbers, with even larger numbers for the decimals |
| Back of ruler | mm-inch table; no tap drill table |
| Raised edge | On the right hand side, to make picking it up from a flat surface easy |
| Lift | 15 cm and 30 cm rulers lift up all the way; 60 cm and 100 cm rulers lift only halfway |
| Product code | EL-MAILE-10854 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Metric Metal Ruler Used For?
A steel rule is the basic length tool of the drawing office, workshop and laboratory: it is laid along the work or drawing with its zero end at the starting point, and the length is read where the edge of the part meets the scale. It also serves as a straightedge for ruling lines and for checking that a surface is straight. The mm-inch table on the back helps convert between metric and imperial sizes, and the raised edge lets the rule be picked up from a flat bench or drawing board without fumbling.
What to Specify When Ordering
- Quantity — the number of rulers required.
- Length — 15 cm, 30 cm, 60 cm or 100 cm.
Frequently Asked Questions
Which lengths is the ruler made in?
It is made in four lengths, 15 cm, 30 cm, 60 cm and 100 cm, in stainless steel with a black scale on a silver base.
What is on the back of the ruler?
The back carries an mm-inch table for converting between millimetres and inches; this version does not have the tap drill table.
How are the numbers marked?
The ruler has extra large numbers, and the numbers for the decimals are larger still, set in black against the silver steel.
What is the raised edge for?
A raised edge on the right hand side makes it easy to pick the ruler up from a flat surface such as a drawing board or bench.
How is the ruler ordered?
Enquire with the Add To Cart button on this page, or send the quantity, the lengths required and your delivery location through the contact page.
OEM Manufacturer
The Metric Metal Ruler is made by Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) at its works at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests measuring instruments and instrumentation trainers for engineering laboratories for engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and can build equipment to an institution's own requirements. Tender and OEM enquiries are handled through the Tenders/OEM page.
Related Measuring Instruments
- Fiber Glass Measuring Tape — fiberglass reel tape in 30, 50 or 100 m lengths with metric and imperial marking.
- Map Measurer — double sided mechanical opisometer for measuring roads and rivers on maps, water proof.
- Digital Stop Watch — black handheld LCD timer with 1/100 second split timing, alarm, calendar and wrist strap.
See the full Measurement and Instrumentation Lab Equipment range or all Mechanical Engineering Lab Equipment.
Request a Quote
For this and other measurement and instrumentation lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. To ask for a quotation, send the number of rulers and the lengths required and your delivery location through the contact page, or use the Add To Cart enquiry button on this page.
Last updated: October 2026
